Covering all of Cyprus
WetSuit® is compatible with our thermal insulation boards
Long product warranty of 5 to 20 years… depending on the type of application
The WetSuit® System, developed in the US, is a hard-grade, water resistant membrane that can be cold-sprayed to any required millimetre thickness and cures in seconds.
No need for torches, solvents or heavy equipment.
Easier to apply than flame-torch or hot, liquid-applied membranes, the water-based, low pressure, non-flammable features of the WetSuit® eliminates most waterproofing job hazards.
Rapid-set
Self-adhering
Impregnable
Roofing
Foundations
Slabs
Vertical Walls
Decks
Balconies
Patios
Swimming pools
Ponds
Planters
Fountains
Rated as probably the most versatile and comprehensive roof waterproofing available today, its simple and rapid application means a superior quality is obtained at a significant cost-saving compared to other systems.
Once the substrate has been prepared, WetSuit® can be installed at a fast and cost efficient rate of:
* 1,000m2 per day with only a 3 man crew
The unique, long-lasting neoprene (non rubber) membrane can permanently seal all types of uneven and difficult surfaces and can be applied to:
concrete – wood – metal – foam – single ply membranes – asphal
Additional cost saving
WetSuit® can often be applied directly over an existing or failed membrane – without the need for its costly removal.
We can also use the system in conjunction with traditional methods for bridging and sealing cracks and substrate irregularities, holes, and rebuilding structures. Wetsuit® can be installed at over 40 per cent thicker than most other membranes.
CALL NOW and speak to one of our expert waterproofing advisers
Wetsuit® 1 Part – is a water-based, medium viscosity, self-levelling membrane used in roofing, waterproofing and air/vapour barrier applications – and ideal for standing seam metal, aged SPF, wood and concrete.
Primarily used as a stand-alone membrane or as counter-flashing for the 2 part system, Wetsuit® 1 Part can also be sprayed, brushed, or roll applied up to 80 millimetres thick on a vertical surface.
WetSuit® 2 Part – is a self-flashing, instant-set liquid membrane which is cold spray applied for virtually all above and below grade applications. Lightweight and with excellent adhesion, surface preparation is generally limited to simple and straightforward pressure washing to provide a clean surface.
Water-Based and Environmentally Friendly
No VOCs (Volatile Organic Compounds) – and therefore, no restrictions on its use. Whereas VOCs are often found in a wide variety of everyday products such as, solvent-based paints/coatings, adhesives, sealants, printing inks and petroleum products, Wetsuit® is completely VOC-free.
Class A Self-Extinguishing Fire Rating
Wetsuit® can also be finished with a reflective coating to meet Energy Efficiency and Cool Roof standards. Energy savings of up to 40 per cent of the cost of air-conditioning a two storey building by applying WetSuit waterproofing with an appropriate white flexible coating.
1600% Elongation and Full Recovery
Classified as a ‘Monolithic Membrane’, the tough, seamless and fully adhered coating is virtually impossible to puncture.
UV Stable
Unlike other fluid applied membranes, Wetsuit® can be exposed without UV damage for 15 years durability, at least.
Cold Resistant
Wetsuit® remains flexible down to -30°F and ideal for locations below the water freeze line.
Class 1-990 Wind Uplift Rating
Roof assembly is rated to withstand extreme uplift pressure and resist severe hail damage
Call NOW and speak to one of our expert waterproofing advisers
Wetsuit® – the No.1 Cyprus waterproofing system for both new and renovation projects